SPS 7 MW «Sun Energy Megirich»
Power:
7,0 MW
Area:
12 ha
The construction period: 02.2018 - 07.2019
Start generated: 02.2018
Technical
features
features
Type of
works
works
System
protection
protection
Conditions
operation
operation
Reviews
Video
- Installed capacity of photovoltaic modules — 8.31 MW;
- Inverter capacity of station – 7,0 MW;
- The volume of annual electricity generation is 10 041 MW/hour;
- CO2 reduction – 4417,14 tons;
- FEM production "RECOM RCM-325-6PA" - 25200 pcs. 330 W each;
- Quantity and power of HUAWEI SUN2000-36KTL inverters - 175 pcs. x 40 kV;
- Number of load-bearing steel structures - 360 pcs;
- Complete transformer substation KTP 2000/35/0,4 - 4 pieces of production EDS-Engineering
Appointment:
- Conversion of solar energy to ~ 35000 V, 50 Hz electric power and its transmission to the electricity grid to other consumers.
Accounting for electricity:
Bidirectional counter:
- on generation networks - EPQS 122.23.17 LL;
- on your own - GAMA 300 G3B.
- Feasibility study design;
- Development of the design documentation;
- Supply of solar panels and inverter equipment;
- Supply of power and switchboard equipment;
- Construction and installation works;
- Connection of the constructed SPS to the grid;
- Member registration in WEM and “green” tariff approval;
- Service maintenance of SPS.
35 kV AC power supply:
- Vacuum switch 35 kV OVB-VBF 40.25.32 2500 A (ABB);
- 1000 A triple-pole disconnectors (Electrical protection service);
- surge arresters - BOW-OCP2-41M-NFF, 35kV (2 class);
- 335 kV CEF fuses - S 30 / 40.5 kV (ABB);
- 35 kV current transformers TRO-70.11 (ABB);
- 35 kV TJO 7 (ABB) voltage transformers.
0.4 kV AC power supply:
- automatic air switch IZMX40B3-V32W-1 3200A 85kA (EATON);
- surge suppressors - ETITEC A 280/5 / C-NO (5kA, 8/20);
- EBV 2 400A (EATON) fuse disconnector;
- NH 1 280A (ETI) fuses.
When operating a solar power plant:
• the conditions and operating requirements of the equipment provided by its manufacturers in the relevant instructions must be observed;
• Before switching on the equipment, make sure that it is not mechanically damaged;
• it is advisable to periodically perform maintenance work on the equipment as recommended by its manufacturer;
• Appropriate safety measures must be followed.